3
2. Operation
2.1 Load battery
2.2 Obtain Thermal Imaging
! Attention: Please press and hold the Freeze/Back button to make calibration if the
imaging has bad quality or retention
.
Push the battery into the battery
compartment until hear the
sound, then the device will be
ready to be turned on. Please
hold both side of the battery
when pulling it out.
Load the battery then press the
power button (about 3 secs) until the
screen imaging. The device will be
finish the
initialization and get ready
to work after about 30 secs.
Open the lens cover and aim at the
target.
