background image

8

3.1.3

Speed Limit Protection

In order to prevent injuries caused by over speed, we have to set maximum riding speed. So when the speed reaches over the maximum riding speed, the pedal

will warp to restrict speed up, and the speed of the scooter will decline.

Attention

Please do not force speed up, when it is close to limitation.

3.1.4

Tilt Protection

If the Scooter tilts over 15

°

, the hub will stop rotating and the system will temporarily switch off.

Notice:

Turn off power switch then restart Scooter to unlock protection.

3.1.5

Power Capability

The capability awarded by LED lights, which is comprise of 5 LED bulbs. All of them will light up, when the capability is over 85% approximately, and
extinguish as the capability decreases. In order to avoid ‘no driving back’ because of long distance, please check the capability before riding. And we advise that
you give enough time to charge your scooter.

5 LED lights will continue to flash, if the capability is less than 10%. And a buzzer will continuously “beep”, at the same time, the front pedal will start to upturn,
forcing the drivers speed to cut and stop. Please do not restart Scooter, in case you fall off due to the power running out.

Mileage may decrease in the winter, because the lithium battery is released faster in low temperature environment.

Summary of Contents for I5


















Reviews: