Part II Control and Basic Operations
BECS-129S Singular-head Computerized Embroidery Machine
17
highest speed for flat embroidery is between 650 rpm and 1000rpm.
Note: Only “
” and “
” can be used during embroidery.
2.4 Indicator Light of Main Shaft Stop Position
It is to show whether the main shaft has stopped in the “stop area”. The
light is on when the main shaft stops in the area. Otherwise the light is off.
The main shaft has to stop in the “stop area” at the operations such as starting
embroidery, returning, moving frame, etc. The user can also manually turn
the shaft to the right position if the main shaft fails to get the very position.
2.5 Start and Stop Button
The start button is on the operation box and it’s for starting embroidery.
The stop button lies on the operation box, and it’s for stopping
embroidery.
Press Start button: it is to start embroidering forward when the machine
stops; during the embroidery, it can change the speed to the low speed
(120rpm) while the user holds it (the speed will resume to the original state
when user release it.)
Press Stop button: During the embroidery, the working is stopped; at
the machine stopping, the machine will return at a single step for 10 stitches
and then return continuously while the user keeps pressing the button.
Summary of Contents for BECS-129S
Page 4: ......