4
Figure 1-6
Add Device Dialog Box for ONVIF
2.
Select the protocol, enter a name, ID, and IP for your camera. Some of the parameters are
described in the table below.
Table 1-1
Parameter Descriptions for Adding a Camera
Parameter
Description
Access Protocol
Protocol for connecting the camera to your NVR.
Uniview
IPC ONVIF1.0
IPC ONVIF2.0
Note:
The parameters and processes of adding device may
vary with the protocol you select.
Device Name
Camera name.
Device ID
ID of the Camera.
Device IP
IP address of the camera.
Device Port
Port number of the camera.
Use the default port number unless otherwise required.
Username
Username and password for accessing the camera.
