45
Figure 9-2
PPPoE Page
2.
Select
Enable
.
3.
Set the username and password for PPPoE access. The username and password are assigned
by your ISP.
4.
After you have completed the settings, click
OK
.
Configuring NAT
Purpose
NAT means Network Address Translation (NAT). When this function is enabled for your NVR, the
private IP address and port number of your NVR will be translated into a public network address
and port number, allowing your NVR to send information via the Internet.
Steps
1.
Click
Configuration
>
Network Configuration
>
NAT
. The
NAT
page is displayed.
