51
Figure 10-1
Setting the Basic Information
2.
Set the name and ID for your NVR.
3.
Enable or disable multicast as required. For detailed descriptions about multicast, see
错误！
未找到引用源。
.
4.
For
Stream Format
and
Protocol
, keep the default setting unless a modification is necessary.
5.
Set
PTZ Release Time
as required. This parameter sets the length of time that elapses before a
PTZ is released automatically when the user controlling the PTZ does not perform any
operation and no other user is gaining control of the PTZ from the current user during this
period.
6.
For
Server Management
, select
Server Management
only when your NVR is managed by a
higher-level management platform.
7.
After you have completed the settings, click
OK
.
Setting Date and Time
Purpose
Set date and time for your NVR.
Steps
1.
Click
Configuration
>
Device Parameters
>
Date&Time
. The
Date&Time
page is displayed. The
following shows an example.
