52
Figure 10-2
Setting Date and Time
2.
Select a correct time zone from the drop-down list for your NVR.
3.
(Optional) Select
Enable
for
NTP
if you have an NTP server. After this function is enabled, you
need to set the NTP server address. When the settings are completed, the time on your
NVR will be synchronized with the NTP server. The following shows an example.
Figure 10-3
Setting the Date and Time with NTP Enabled
4.
Set the correct time in the
Set Date&Time
field.
5.
After you have completed the settings, click
OK
.
Setting the Language
1.
Click
Configuration
>
Device Parameters
>
Language
.
2.
Select the desired language from the drop-down list.
3.
Click
OK
.
