23 of 36
MAINTENANCE AND USE MANUAL
DUNE
23
26
16
16
30
19
Figure
9
Fig. 9 :
Insert your hands through the hand slots
(
19
and
30
).
Start sandblasting with the handpiece (
16
) that
corresponds to the cylinder you have selected (via
the 4-way switch).
23
25
Figure
8
Fig. 8 :
After lowering the glass hatch, set the
pressure by turning the knob (
5, 12
and
23
) clockwise
slowly: rotate until the desired pressure appears on
the gauge (
6, 13
and
25
); then press the foot-operated
air control pedal (
31
).
The
DUNE
features a system that blocks the flow of sand when the sandblasting control is
released, thus optimising consumption. This device also maintains the pressure inside the
cylinder and so improves equipment response times when the sandblasting control is activated.
The vent valve (on the cylinder lids) is used to release pressure when the equipment is off and
so allows the lid itself to be opened.
20
32
2
Figure
10
Fig. 10 :
To unscrew the cylinder lid when the
equipment is off press the vent valve for a few secon-
ds (
2, 20
and
32
) to vent any compressed air inside
the cylinder; once the pressure has been released
the lid can be removed.
7.3.1
Vent valve
31
Always put on gloves before inserting your hands in the slots and always keep
them on for the entire duration of the work session.
Summary of Contents for dune 2
