17
hurrimix
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
EN
•
it is prohibited to work objects with features different from those
for which the equipment has been designed
;
•
in the event of a malfunction follow the advice given in this
manual; if in doubt, stop the equipment and contact your
Authorised After-Sales Centre immediately
;
•
do not open equipment compartments containing electric parts
;
•
before carrying out any cleaning, routine and/or extraordinary
maintenance, make sure that the equipment has been unplugged
from the mains power supply
;
•
do not replace the power supply cable or tamper with the
supplied plug; to replace the same due to damage or wear, only
contact the Authorised After-Sales Centre
;
•
always make sure that there are no foreign bodies inside the
work area. These could prevent damage to the equipment and/or
injury to the staff
;
• do not use petrol or flammable solvents as detergents; use only non-
flammable, non-corrosive and non-toxic substances. (see par. 8.1).
Zhermack S.p.A. cannot be held responsible for any
damage to the equipment owing to incorrect maintenance
performed by unskilled staff or maintenance that does
not comply with that stated in this manual.
As of this moment Zhermack S.p.A. is relieved from
any injury/damage to persons/objects that should occur
following any different use and use not declared in this
manual.
In the event of a fire - no matter how small - inside the
equipment or nearby, only use powder extinguishers. Do
not use water.
ChAPTER 3: DESCRIPTION OF ThE EqUIPMENT
3.1
GENERAL DESCRIPTION OF ThE EQUIPMENT
The device described in this manual is the
hurrimix
mixer, designed
for mixing automatically alginates and plasters for dental use.
3.2
DESCRIPTION OF ThE COMPONENTS -
Fig. A
1. Lid
2. Centrifugal compartment
3. Digital display
4. Main switch
5. Main power socket
6. Main power cable
7. On/Off button
8. Program button
9. Button “+” mixing time
10. Button “-” mixing time
11. START/STOP button
3.3
IDENTIFICATION DATA
Fig. B:
the equipment described in this manual has a plate giving
identification data of the same and the Manufacturer:
A
Name and address of the Manufacturer
B
Equipment code and model
C
Serial number
D
Power supply information
The equipment has been built in compliance with the EEC
Directives stated in the attached “CE Declaration of Conformity.
Use the identification data to request spare parts, information and
After-Sales Assistance from authorised centres. If the plate should
deteriorate with use and become illegible, even partially, request a
replacement from the Manufacturer stating all data.
Do not remove and/or ruin the plate so that the
equipment identification data can be recognised at all
times.
ChAPTER 4: TEChNICAL FEATURES
4.1
TEChNICAL FEATURES AND FUNCTIONING PRINCIPLE
Zhermack S.p.A. creates qualitatively and technologically advanced
work instruments, in away that the user feels that they are made-
to-measure his everyday working requirements.
Zhermack S.p.A. uses state-of-the-art instruments in the design field
when making these products, thus ensuring maximum equipment
functionality. The use of top quality materials and performance of
all inspections necessary for operator safety guarantee Zhermack
S.p.A products, making them competitive at a worldwide level.
The operating principle that characterises
hurrimix
mixer is based
on the mixing alginates and plasters for the dental industry. The
device offers the following advantages:
• consistent mixing quantity;
• even mixture;
• mixing time is significantly reduced compared to manual mixing;
• software with 20 mixing programs (that can be customised by the
user): 10 programs for alginate and 10 for plasters, some of them
are preset to be used with Zhermack products;
• programming and mixing are easy to manage, thanks to the large
digital display;
• the cover can be customised in 6 colours to blend in with the
decor of the Dental Clinic.
4.2
TEChNICAL DATA
Technical data relative to the
hurrimix
mixer:
Power voltage 230 V ~ ± 10% 50/60Hz
115 V ~ ± 10% 50/60Hz
Absorbed power
400 Watt
Protection rating IP
IPX0
Noise level
<70 dB
Overvoltage category
II
Applicable pollution degree
2
4.2.1
STANDARD SUPPLIES
- Fig. C
As well as this Use and Maintenance Manual and the quick guide
the
hurrimix
mixer is also supplied with:
Components
Q.ty
Code*
12. Containers for alginate mixing
2
XR0250800
13. Containers for plaster mixing
2
XR0250810
14. Set of spatulas
1
XR0250820
15. Pre-mix stick
1
XR0250830
16. Bottle with graduated measuring cup
1
XR0250840
(*) Order Code to be used when ordering spare parts.
4.2.2
ACCESSORIES AVAILABLE ON REQUEST
- Fig. D
Kit of interchangeable covers:
Components
Q.ty
Code*
White (Standard)
1
XR0250850
Azure (on request)
1
XR0250855
Orange (on request)
1
XR0250860
Blue (on request)
1
XR0250865
Green (on request)
1
XR0250870
Grey (on request)
1
XR0250875
(*) Order Code to be used when ordering spare parts.
4.2.3
WEIGHT AND OVERALL CLEARANCE
Overall clearance without packaging
Height (h)
cm. 31
Height with door open (max. h)
cm. 50
Width (l)
cm. 24
Depht (p)
cm. 30
Empty weight
Kg. 21
ChAPTER 5: TRANSPORT AND hANDLING
5.1
GENERAL WARNINGS
In order to prevent injury/damage to persons/objects,
pay great care when handling the equipment,
scrupulously complying with all precautions and
instructions contained in the following paragraphs.
5.2
PACKAGING AND UNPACKING
Fig. E:
All material is carefully controlled by the Manufacturer
before delivery. On receiving the equipment, make sure that it has
not been damaged during transport and that the packaging has
not been tampered with, resulting in missing parts.
Should any damage or missing parts be noted, inform the Dealer
and the Carrier immediately by forwarding photographic evidence.
The packaging, made up of a cardboard box with expanded plastic
internal protections, contains:
• the
hurrimix
mixer;
• the material supplied (see par. 4.2.1);
• the Use and Maintenance Manual.
• the quick guide.
