Zhermack Zeta sonic, User Manual

21

The reference figures can be found on pages 3, 4, 5, 6 and 7 of this manual and in the Quick Guide. 

EN

zeta sonic

2.4  GENERAL SAFETY PROVISIONS

The  operator  must  comply  with  the  advice  and  warnings  given  below  in 

order to ensure safe, long-lasting equipment performance: 

•  do not allow untrained staff to use the equipment;

•  prepare  an  optimal  worktop,  making  sure  that  the  operational  space  is 

free from obstacles, clean and has suitable lighting;

•  avoid distractions when using the equipment;

•  it  is  prohibited  to  work  objects  with  features  different  from  those  for 

which the equipment has been designed;

•  in  the  event  of  a  malfunction  follow  the  advice  given  in  this  manual;  if 

in  doubt,  stop  the  equipment  and  contact  your  Authorised  After-Sales 

Centre immediately;

•  do not open equipment compartments containing electric parts;

•  before  carrying  out  any  cleaning,  routine  and/or  extraordinary 

maintenance, make sure that the equipment has been unplugged from 

the mains power supply;

•  do not replace the power supply cable or tamper with the supplied plug; 

to replace the same due to damage or wear, only contact the  Authorised 

After-Sales Centre;

•  always make sure that there are no foreign bodies inside the work area. 

These could prevent damage to the equipment and/or injury to the staff;

•  do  not  use  petrol  or  flammable  solvents  as  detergents;  use  only  non-

flammable, non-corrosive and non-toxic substances. (see par. 8.1).

•  Zhermack  cannot  be  held  responsible  for  any  damage  to  the 

equipment  owing  to  incorrect  maintenance  performed  by 

unskilled staff or maintenance that does not comply with that 

stated in this manual.

•  As  of  this  moment  Zhermack  is  relieved  from  any  injury/

damage  to  persons/objects  that  should  occur  following  any 

different use and use not declared in this manual.

In the event of a fire - no matter how small - inside the 

equipment  or  nearby,  only  use  powder  extinguishers.  Do  not 

use water.

CHAPTER 3:   DESCRIPTION OF THE EQUIPMENT

3.1  GENERAL DESCRIPTION OF THE EQUIPMENT

This manual describes the zeta sonic ultrasonic bath designed for rapid 

in-depth cleaning and/or disinfection of dental prostheses and dental and 

surgical instruments made from metal, glass, ceramic and other material.

3.2 

DESCRIPTION OF THE COMPONENTS - FIG. A

  1.  Stainless steel tank  

  2.  Carrying handles  

  3.  Power cable

  4.  Drainage knob

  5.  Drainage cap

  6.  Power connector  

  7.  Time light

  8.  Sweep button

  9.  Time dial

10.  START/STOP button

11.  Temperature light

12.  Degas button

13.  Temperature dial

14.  ON/OFF button

3.3  IDENTIFICATION DATA

Fig. B: the equipment described in this manual has a plate giving 

identification data of the same and the Manufacturer:

A 

Name and address of the Manufacturer

B 

Equipment code and model

C 

Serial number

D 

Power supply information

The equipment has been built in compliance with the EEC Directives stated 

in the attached “CE Declaration of Conformity. Use the identification data to 

request spare parts, information and After-Sales Assistance from authorised 

centres. If the plate should deteriorate with use and become illegible, even 

partially, request a replacement from the Manufacturer stating all data.

Do not remove and/or ruin the plate so that the equipment 

identification data can be recognised at all times.

CHAPTER 4:   TECHNICAL FEATURES

4.1  TECHNICAL FEATURES AND FUNCTIONING PRINCIPLE

Zhermack  creates  qualitatively  and  technologically  advanced  work 

instruments, in away that the user feels that they are made-to-measure his 

everyday working requirements.

Zhermack uses state-of-the-art instruments in the design field when making 

these products, thus ensuring maximum equipment functionality. The use 

of  top  quality  materials  and  performance  of  all  inspections  necessary  for 

operator  safety  guarantee  Zhermack  products,  making  them  competitive 

at a worldwide level.

The zeta sonic appliance functions on the principle of ultrasonic 

cleaning, a procedure able to guarantee uniform in-depth cleaning. 

The  high  frequency  energy  produced  by  the  ultrasound  generator  is 

transformed  into  mechanical  energy  by  means  of  special  piezoelectric 

oscillation systems and then transferred to the cleaning solution.

This generates millions of minute air bubbles which are filled instantaneously 

by  the  compressive  action  of  the  vibrating  waves  produced  by  the 

ultrasound,  in  other  words,  they  implode. The  high  energy  currents  (jets) 

generated in the cleaning solution remove the dirt present on the surfaces, 

reaching the most inaccessible recesses and invisible holes in the object to 

be cleaned and/or disinfected.

Zeta sonic offers the following advantages:

•  body made from hygienic easy-to-clean stainless steel and plastic handles 

to move the appliance safely even when the body is hot;

•  sweep function for optimum distribution of the ultrasound waves in the 

cleaning solution;

•  automatic and manual degas function to eliminate possible air bubbles 

present  in  the  cleaning  solution  and  improve  the  efficiency  of  the 

ultrasonic treatment;

•  automatic mixing of the cleaning solution during heating;

•  automatic  ultrasonic  cleaning  (when  the  set  temperature  has  been 

reached);

•  quick user-friendly display of all the parameters set;

•  drain system for quick safe draining of the cleaning solution.

4.2  TECHNICAL DATA

Power voltage                                                       230 V ~ ± 10% 50/60Hz

Total absorbed power  

 280 W

Ultrasound frequency   

 37 kHz

Actual ultrasound power  

 80 W

Maximum ultrasound power  

 320 W

Heating power  

 200 W

Protection rating IP  

  IPX0

Noise level  

 <70 dB

Overvoltage category  

  II

Applicable pollution degree  

  2

4.2.1  STANDARD SUPPLIES - FIG. C

Components 

Q.ty 

    Code*

15. Lid for basket 

1   

XI0140002

16.  Basket 

1  

XC0140001

17. Drain hose 

1  

XR0140001

18. Drain kit 

1  

XR0140002

19.  Filter 

1  

XC0140002

(*) Order Code to be used when ordering spare parts.

4.2.2  ACCESSORIES AVAILABLE ON REQUEST - 

FIG. D

Components 

Q.ty 

    Code*

20. Lid for beakers  

1  

XR0140008

21. Glass beaker with lid  

1  

XR0140003

22. Basket for burs  

1  

XC0140003

(*) Order Code to be used when ordering spare parts.

4.2.3  WEIGHT AND OVERALL CLEARANCE

Maximum tank capacity (litres)  

           2.75 

Tank filling capacity (litres)  

           1.9

Tank dimensions (l x p x h - mm)  

                 240x137x100

External dimensions of appliance  (l x p x h - mm)                  300x179x214

Basket dimensions  (l x p x h - mm)                               198x106x50

Weight (kg)  

                               3.3