17
After balancing CRANE-M3, the motor torque needs to be adjusted for proper
function. You can adjust the motor torque according to the weight of your camera
and lens, so that the CRANE-M3 can be used in its ideal state. Following are two
methods for adjustment. It is recommended to use auto-calibration.
1.Auto calibration:
Auto calibration will adjust the motor torque according to
the weight of the carried camera and lens. Select "Settings"- "Auto Calibration",
tap to enter calibration. You can see the calibration progress on the screen.
Motor Torque Adjustment
Using the CRANE-M3
When performing auto-calibration, please make sure that the three axes are
unlocked and the gimbal is straightly put on a flat surface. Please don't touch
the gimbal when calibrating.
2.Parameter Settings – Motor Settings:
Three levels (Low/Medium/High) are provided. Select the appropriate level
according to the weight of the carried camera and lens.
Motor Settings
