background image

5

zhiyun-tech.com

6

zhiyun-tech.com

Disclaimer and Warning

Disclaimer and Warning

13.Do not place the battery cell on a conductive surface (such as a metal desk surface).
14. Prevent use of wires or other metal objects that could cause positive and negative short-circuit 

to the battery.

15. If the battery terminal is dirty, wipe it with a clean, dry cloth. Otherwise it will cause a bad 

battery connection, which may result in energy loss or charging failure.

Battery Charging

1.  Do not attach the batteries to a wall outlet or car charger socket directly. Always use a ZHIYUN 

approved adapter for charging. ZHIYUN takes no responsibility if the battery is charged using 
a non-ZHIYUN charger.

2.  Do not put the battery and charger near flammable materials or on flammable surfaces (such 

as carpet or wood). Never leave the battery unattended during charging to prevent any 
accident.

3.  Do not charge the battery immediately after use, because the battery temperature may be too 

high. Do not charge the battery until it cools down to normal room temperature. Charging the 
battery with its temperature over 40° C or lower than 15° C may lead to leakage, overheating, 
or damage.

4.  Examine the charger before use, make sure there is no damage to the enclosure, cord, plug, or 

other parts. Never use a damaged charger. Do not clean the charger with any liquid containing 
alcohol or other flammable solvents. Disconnect the charger when not in use.

Battery Storage

1.  Keep batteries out of the reach of children and pets.
2.  Do not leave the battery near heat sources such as a furnace or heater, or inside of a vehicle 

on hot days. Never expose the battery in any environment with temperature of over 60° C. The 
ideal storage temperature is 22° C-28° C.

3.  Store batteries in a dry environment.
4.  Do not leave the battery unused for too long after it has been completely discharged to 

prevent over-discharge of battery which may result in battery damage and permanent failure.

Battery Maintenance

1.  Never use the battery when the temperature is too high or too low.
2.  Do not store the battery in any environment with a temperature of over 60° C.

Transportation Notice

1.  Discharge the battery power to 5% or lower before carrying the battery on an airline flight. 

Only discharge the battery in a fireproof location, ideally in a dry and open area.

2.  Do not store or transport batteries together with metal objects such as eyeglasses, watch, and 

jewelries, etc.

3.  Do not transport damaged batteries. When transporting, be sure to discharge the battery to 

less than 50%.

Battery Disposal

Dispose of the battery in specific recycling boxes only after a complete discharge. Do not put 
away the battery in regular trash containers. Strictly follow your local regulations regarding the 
disposal and recycling of batteries.

NOTICE

Battery Use

Make sure the batteries are fully charged before each time of use.

Battery Charging

The battery will stop charging automatically when it is full. Disconnect the batteries from the 
charger when fully charged.

Battery Storage

1.  Discharge the battery to 40%-65% if it will NOT be used for over 10 days. This can greatly 

extend the battery life.

2.  The battery enters hibernation mode when voltage gets too low. Charge the battery will bring 

it out of hibernation.

3.  Remove batteries from the stabilizer when not in use and store them in a specialized container. 

Battery Disposal

If the battery cannot be fully discharged, do not leave it in the recycling box, but contact a 
professional battery disposal/recycling agent for further assistance.

This document is subject to change.
ZHIYUN

 TM 

is a trademark of ZHISHEN TECH.

Copyright©2017-2018 ZHISHEN TECH. All rights reserved.

Summary of Contents for Crane Plus





















Reviews: