background image

13

Disclaimer■and■Warnings

7. Do not disassemble or use any sharp object to puncture the battery in any way. 

Otherwise, the battery may leak, catch fire or explode. 

8. Do not mechanically strike, crush, or throw the battery. Do not place heavy 

objects on the battery or charger. 

9. Electrolytes inside the battery are highly corrosive. In case of accidental contact 

of any electrolytes with your skin or eyes, rinse immediately with water for at 
least 15 minutes and seek medical advice as soon as possible. 

10. Do not use the battery if it has been involved in a crash or heavy impact. 
11. Do not heat the battery and never put the battery in a microwave oven or in a 

pressurized container. 

12. Do not place the battery on a conductive surface (such as a metal desk 

surface, eyeglasses, watch, jewelry, etc.) 

13.Prevent use of wires or other metal objects that could cause positive and 

negative short-circuit to the battery. 

Battery Charging

1.Do not put the battery and charger near flammable materials or on flammable 

surfaces (such as carpet or wood). Never leave the battery unattended during 
charging to prevent any accident. 

2.Please disconnect the battery and the charger when fully charged. 
3.Do not charge the battery immediately after use, because the battery 

temperature may be too high. Do not charge the battery until it cools down to 
normal room temperature. Charging the battery with its temperature over 45° C 
or lower than 0° C may lead to leakage, overheating, or damage. 

Battery Storage

1.Keep batteries out of the reach of children and pets. 
2.Do not leave the battery near heat sources such as a furnace or heater, or inside 

of a vehicle on hot days. Never expose the battery in any environment with 
temperature of over 60° C. The ideal storage temperature is 22° C-28° C. 

3.Store batteries in a dry environment. 
4.Do not leave the battery unused for too long after it has been completely 

discharged to prevent over-discharge of battery which may result in battery 
damage and permanent failure.

Battery Maintenance

1. Do not over-charge or over-discharge the battery, which will damage the 

battery; 

2. The battery performance will be affected for not being used for a long time; 

Summary of Contents for FIVERAY FR100C























Reviews: