25
Disclaimer and Warning
Safe Operation Guidelines
WARNING:
1. Never allow the product to come into contact with any liquid. Never immerse
the product in water or make it get wet. Never use the product in the rain
or a humid environment. Corrosion reaction may occur when the interior
of the product is exposed to water, which may cause the battery to ignite
spontaneously and may even cause an explosion.
2. If the product catches fire, please use water or water mist, sand, fire blanket,
dry powder, carbon dioxide fire extinguisher immediately to put out the fire.
Please choose the method according to the actual situation.
3. Please use the product in an environment with a temperature between -10° C
and 45° C.
4. It is forbidden to disassemble the product in any way. If the battery is pierced
during disassembly, it will cause the electrolyte inside the battery to leak or
even cause fire or explosion.
5. Mechanical impact, rolling, or throwing of the product is prohibited. Do not
place heavy objects on the product.
6. Do not heat the product. Do not place the product in a microwave oven or
pressure cooker.
7. It is forbidden to place the product near a heat source (stove or heater, etc.)
or inside the car in hot weather. Do not store the product in an environment
above 45° C. The ideal temperature of storage is 22℃ to 28° C.
8. Do not store the battery for a long time after it is completely discharged to
avoid the battery entering the over-discharged state and causing damage to
the battery cell, and it will not be able to resume use.
BE CAREFUL:
1. SMOOTH-X2 is a high-precision control device. Damage may be caused to
SMOOTH-X2 if dropped or subject to external force, and this may result in
malfunction.
2. Make sure the rotation of the gimbal axes is not blocked by external force
when SMOOTH-X2 is turned on.
3. SMOOTH-X2 is not waterproof. Prevent contacts of any kind of liquid or cleaner
with the SMOOTH-X2. It is recommended to use dry cloth for cleaning.
4. Protect SMOOTH-X2 from dust and sand during use.
CAUTION:
1. After the charging is complete, disconnect the product from the charger.
2. If you do not use the product for more than 10 days, please charge/discharge
the battery to 40%-65% and store it to extend the battery life.
Summary of Contents for SMOOTH -X2
Page 2: ...SMOOTH X2 User Guide Z H I Y U N E N v 1 0 0 ...
Page 36: ......