6381-A4 Router Users Guide
108
Access Control
The Access Control page provides a means to allow Telnet, Web, FTP (file transfer protocol) or
TFTP (trivial FTP) access to the 6381 RG for devices which are either on the WAN or LAN sides
of the 6381 RG.
When
Enable Access Control
is checked, the devices in the
IP Access List
, designated by their
IP Addresses
will have the access defined in the
WAN
or
LAN group 1
column.
To configure access to the 6381 RG:
1.
From the navigation bar at the top of the screen click Advanced
2.
From the left hand navigation pane select Access Control.
3.
To enable access to the 6381 check Enable Access Control.
4.
To enable access to a device within your network, select the Telnet, Web, FTP or TFTP
options for LAN group 1, and add the IP for that address to the IP Access List
