6381-A4 Router Users Guide
60
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is
configured:
1.
From the navigation bar at the top of the screen click Advanced
2.
From the left hand navigation pane select UPnP.
This will bring up the screen shown below.
3.
Check Enable UPnP and then select which connection (WAN or LAN) will utilize UPnP.
4.
Click Apply
The Apply button will temporarily save this connection. To make the change permanent, click
Tools
(at the top of the page) and select
System Commands
. On the
System Commands
page, click
Save All
.
