4-2
IMACS System Release 5.1.9
Reference Guide
Model No.
Running Head
System Initialization
System Configuration and Operation
2. Connect a VT100-compatible terminal to the TERM jack on the Interface card front
panel. Use a cable with an RJ-48 modular plug on one end for this connection.
3. Configure the terminal to operate at 9.6 kbps, 8 data bits, no parity, and 1 stop bit.
4. Press the RETURN key. The Registration Screen in Figure 4-1 appears.
Figure 4-1. First Time Registration Screen
5. Press “
R
” to update Registration.
6. Enter password as shown in Figure 4-2. Refer to Table 4-1 for default passwords and
access level, press the <Enter> key.
*** Mi
Press ‘R’ to update Registration
*** Missing Registration Data ***
