5-42
IMACS System Release 5.1.9
Reference Guide
Model No.
Running Head
CPU Host Software Upgrade Procedure
CPU Card
9. In COM 1 window, set BITs per second to “
9600
” (leave other settings as is) click
OK
.
10. In Upgrade window, click
File
menu, select
Properties
, and select
Settings
.
11. In Emulation window, select
VT100
and click
Terminal Setup
.
12. Select
132 column mode
, click
OK
.
13. Close
Properties
window and save.
14. Right click on
Upgrade Icon
and select
Create Shortcut
.
15. Drag shortcut to the desktop.
5.6.2.1
Log Upgrade Activity
Create a log to record upgrade activity on a per-site basis that includes the following
information:
•
Site name, date and time, and name of technician performing upgrade
•
System name(s) and number of CPU cards per system
•
Model, serial number, and host version of previous CPU cards
•
Model, serial number, and host version of new CPU cards
•
Model and serial number of Interface card
5.6.3
Upgrade Preparation
Follow the steps listed below to perform an upgrade.
1. Connect the laptop to the TERM port on the Integrated Access System.
2. Press
Enter,
and log into the system.
3. Using the arrow keys, move the cursor to
CPU
and press
Enter
.
4. Verify and record the current host software version.
5. Determine one of the following upgrade methods to be used:
•
Replace the CPU if the current version is 5.0.0, or
•
Download
flash if the version is 5.0.1 or above
.
