B-2
IMACS System Release 5.1.9
Reference Guide
Model No.
Running Head
All available PVCs are already taken.
The number of PVCs available on the FRAD Card Main Screen has been exceeded by the
number of PVCs assigned on the PVC Screen. Assign a number of PVCs on the PVC Screen
that is lower than the quantity chosen in the Main Screen.
All blank prt repot.
You chose the empty option setting for all four elements of the Print Alarm on the Interface
Card. This combination of settings is invalid and cannot be saved. Choose the proper option
settings for these elements.
ASYNC/5 databits must have 2 stop or parity.
You have assigned an SRU card port to an asynchronous circuit with 5 data bits, one stop bit,
and no parity. This is an invalid combination of option settings. Either choose two (2) stop bits,
or enable parity on that port.
ATM PHY is not active.
The physical ATM port is not active.
B-channels must be allocated.
You are trying to activate an ISDN PRI D-channel that has no assigned B-channels. Assign
B-channels to the D-channel.
Bad routing format.
The telephone numbers used for the ISDN-PRI routing table are not formatted correctly.
Re-enter these numbers in the proper format.
Bad Service number format.
ISDN-PRI Server numbers must have two digits. The valid service number range is from 01
to 99.
BCH is not supported in XCON.
You cannot use BCH error correction on an OCU-DP card in systems with cross-connect
WAN cards.
