SkyZhone 1604, 1404, 1204 Hardware Installation Guide
35
Figure 14: Mounting Bracket with screw locations
6.
Attach the mounting bracket and the base to the wall (Figure 15). (The base
has an UP arrow cut into the plastic casing to ensure in proper orientation.)
Use a 1/4 inch drill masonry bit to install a 1 inch plastic insert to secure the
cover and the aluminum frame to the concrete wall with the appropriate
screws.
Figure 15: Bracket and Base
7.
Attach the protective cover to the base and then attach the base to the
(concrete) wall. Note that the cover should be attached so that the top
contains the two cutouts for the angled antennas.
