Configuring Data and Voice
54
Z-Edge 64 Configuration Guide
audio-service: ------> {enabled}:
frame-mode-data: ----> {enabled}:
cas: ----------------> {disabled}:
pcm-encoding: -------> {mulaw}: alaw
max-length-frame: ---> {65535}:
max-sdu-length: -----> {1536}:
ras-timer: ----------> {0}:
preferred-ap-index: -> {1}:
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
zSH> update aal2-cid-profile 1-1-1-0/atm/0/37/161
Please provide the following: [q]uit.
admin-status: -------> {up}:
sscs-type: ----------> {i3662}:
this is for B channels
audio-service: ------> {enabled}:
frame-mode-data: ----> {enabled}:
cas: ----------------> {disabled}:
pcm-encoding: -------> {mulaw}: alaw
max-length-frame: ---> {65535}:
max-sdu-length: -----> {1536}:
ras-timer: ----------> {0}:
preferred-ap-index: -> {1}:
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
Subscriber profiles
A subscriber profile defines the basic configuration of the subscriber’s
physical interface. Subscriber profiles use an index in the form subId/
lineGroupId, where:
•
subId (subscriber identifier) is a unique index for the subscriber and is
used to associate voice and data profiles with a subscriber.
•
lineGroupId is the index number of the WAN port.
The subscriber supports the following parameters (all others should be left at
their default values):
Parameter
Description
id
User-defined value for the subscriber.
line-group-id
The line group identifier of the WAN
port.
iad-type
Identifies the type of IAD used by the
subscriber.
Values:
zedge64s
