Transparent bridging
Z-Edge 64 Configuration Guide
73
dhcpClientId: --> {}: 'clientgroup1'
state: ---------> {invalid}:
dnsArray has 5 elements. Modify [a]ll, [n]one, a [s]ubset, or [q]uit? n
Using current values for elements 1-5
routersArray has 5 elements. Modify [a]ll, [n]one, a [s]ubset, or [q]uit? n
Using current values for elements 1-5
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
The system displays the vendorclassID and the dhcpclientID as octet strings:
zSH> get dhcp-client-lease-resource 1/1/10
serverName: ----> {}
renew: ---------> {0}
rebind: --------> {0}
bootFile: ------> {}
tftp: ----------> {0.0.0.0}
hostName: ------> {}
domainName: ----> {}
vendorClassId: ->
{fe:5a:48:4f:4e:45:52:55:4c:45:53:fe:00:00:00:0b:00:00:00:01:00:00:00:03:00:00:00:06:
00:00:00:01:00:00:00:04:00:00:00:01:00:00:15:80:00:00:001:00:00:00:02:00:00:00:01:00:
00:00:02:fe:00:00:00:06:31:31:30:33:36:32:fe:00:00:00:19:5a:45:44:47:45:36:34:42:48:3
2:41:20:43:41:4e:20:31:2e:33:2e:30:2e:32:2e:61:fe:00:00:00:04:50:61:73:73:fe:4e:fe}
dhcpClientId: --> {63:6c:69:65:6e:74:67:72:6f:75:70:31}
this is the DHCP client-identifier in octet
form. It will be used in the dhcp-server-lease profile of the system’s DHCP server
.
state: ---------> {invalid}
dnsArray has 5 elements. Display [a]ll, [n]one, a [s]ubset, or [q]uit? n
routersArray has 5 elements. Display [a]ll, [n]one, a [s]ubset, or [q]uit? n
Transparent bridging
Z-Edge 64 units can use transparent bridging across Ethernet/802.3 networks.
As a transparent bridge, the unit’s presence and operation are not visible to
other IP network hosts.
Note:
Your personal computer, the Z-Edge 64 unit on which you
created the bridge-interface-record profiles, and the destination
terminal equipment must be in the same subnet for transparent
bridging to be functional.
Transparent bridging is not configurable over ZMS.
Modify the following parameters of the atm-vcl profile to enable transparent
bridging:
