2.
Pairing the headset with Bluetooth devices
1) How to enter pairing mode
Functions
Operation
Prompt tone
Enter
pairing
mode
Ensure the headset is off, and
then press and hold
MFB
button for 5~6 seconds until red
and blue LED flash alternately
Pairing
Remark:
Pairing mode will last 2 minutes. If no devices can be connected
after 2 minutes, it will return to standby mode automatically.
2) Pairing the headset with a Bluetooth cell phone via Bluetooth
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
1)
Keep your headset and phone within 1 meter when pairing;
2)
Press MFB button for 6 seconds and release it until red LED and blue
LED flashes alternately. Then your cell phone enter paring mode.
3)
Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select “BTH033L” from
the list of devices shown; After successful connecting, the headset emits
“your headset is connected” and blue LED flashes twice every 4 seconds.
Remarks:
According to the indication, enter password or PIN No: “0000”( If the
mobile phone supports Bluetooth V2.1, password is not required.);
If pairing is failed, please turn off the headset first and then re-pair
according to steps 1
～
6 mentioned above.
After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time. The headset can
remember 8 paired devices, when the number of paired devices exceeds
8, the first one will be replaced.
Every time the headset is turned on, not connected, press any button, it
will connect to last connected device automatically.
3
3) Pairing headset with a Bluetooth cell phone via NFC
BTH033L support NFC function, it can quickly connect with Bluetooth cell
phone via NFC, hereby take Samsung S3(Android 4.0) (Not included in
accessory) for example.
The general pairing procedures are as follows:
1)
Please
activate the Bluetooth and NFC function of cell phone;
Please refer to following pictures
：
Remarks:
When the cell phone is in sleep or lock screen status, you can’t active
NFC function to connect.
Prior to pairing the headset for the first time, you need use your cell
phone to touch the NFC area until enter pairing mode.
When active the NFC function, try to make the cell phone and the
headset keep touch for longer. Otherwise it may fail to pair.
When the headset is disconnect (in standby mode), you can active NFC
function to fast connect. If the headset has connect, use your cell phone
to touch NFC zone, it will disconnect automatically.
4
