4
29
901 / 1001
The hose is led away through the hole in the bottom of the machine.
Re-install the reservoir into the machine.
Seal the drainage spout with the appropriate plug when you wish to operate
the machine normally again, without a drainage hose.
D
MAINTENANCE
Remove the plug from the socket before carrying out any maintenance or
cleaning work on the machine. For safety reasons it is forbidden to use large
amounts of water while cleaning:
E
Clean the outside with a slightly damp cloth followed by a dry cloth.
E
Do not use alcohol or cleaning products when cleaning.
E
Clean the air filter every week. Remove the filter from the back of the
machine and clean it with a vacuum cleaner (fig. C).
E
STORAGE
Take the following steps if you do not intend to use the machine for an extended
period of time:
E
Remove the plug from the socket and empty the reservoir.
E
Clean and/or replace the air filter. Filters are available at your supplier.
E
Store the machine in a dust-free environment, e.g. in a plastic bag.
F
TIPS FOR SAFE OPERATION
E
To ensure that you get the best service from your Zibro Clima do not place the
dehumidifier next to a radiator or other heat source as this will reduce the
performance of your dehumidifier.
E
The machine was designed to dehumidify excessively humid rooms.
You should not use it for any other purpose.
E
It is dangerous and forbidden to modify the machine.
E
Always contact your supplier if repairs are required.
E
It is forbidden for children to play with the machine. The machine may only
be used by adults.
E
The machine must always be connected to the mains with an earthed
connection.
E
Always switch the machine off before carrying out maintenance or cleaning
work.
E
Do not install the machine near heat sources or near flammable
installations/materials (e.g. curtains), explosive environments.
E
Whenever you disconnect the machine, you must always wait at least three
minutes before reconnecting it.
E
It is forbidden to cover the machine or to insert foreign objects into the
machine in connection with the risk of overheating or fire.
E
The machine may not become wet.
E
The machine must always be placed vertically, particularly during transport.
Always empty the water reservoir before transporting the machine.
5
4
C
C
☞
