4
41
F
CONTINUOUS DRAINAGE OPERATION
It may be more convenient to set up the dehumidifier for continuous drainage
with the following procedure:
•
Remove the water container from the unit;
•
Click the supplied spout (the long end depressing the microswitch) firmly in
place;
•
Place an appropriately sized drainage pipe over the spout inside the housing;
•
Place the other end of the pipe in a drain, ensuring that:
- it Is not twisted, folded, or otherwise likely to obstruct the water flow,
- the spout is not under the water level of the drain;
•
There must be a gradual downward slope from the spout to the drain.
To return to water container use, take the spout out and replace the water
container.
G
CLEANING
Disconnect from the mains power supply.
Clean regularly with a common, non abrasive, household detergent, without
solvents.
NOTE
G
In very cold weather conditions precautions should be taken to prevent the
drainage pipe from freezing.
