OPERATION
CONTROL PANE
L
A
ON-/OFF-button
B
Timer button
C
SETTING
Insert the plug
7
in the wall outlet.
Press the
ON/OFF button to switch the humidifier on. The “ROOM HUMIDITY”
light, the “SET HUMIDITY” light and “ON/OFF” light will switch on.
Set the desired humidity by pushing “
- SETTING” button.
The device starts to humidify as soon as it is switched on. If the water container is empty
during the operation a buzzer will sound and the “empty
” light is blinking.
Press the
ON/OFF button again to switch the device off. This will take
approximately 1 minute, because the unit has to cool down. Never switch off the unit
by pulling the plug out of the wall socket!
HOW TO USE THE AROMA RESERVOIR
Switch the device off by pushing the
ON/OFF button.
Open the aroma cap.
2
1
G
NOTE!
• If outside temperature is cold, the humidity capacity will be reduced.
• Please check the remaining amount of water in the container before use.
Allways switch off the device before filling the water container.
• When the unit is not being used, all water should be removed from the unit
and the water container.
4
G
NOTE!
• If the “ROOM HUMIDITY” is higher than the “SET HUMIDITY” the unit does
not operate.
• If you set “continuous mode ” the unit works in the high “60%”
humidification mode.
3
2
1
4
46
B
C
A