Chapter 1, INSTALLATION
36
6. Fasten the right-angled air hose to the inlet with the
hose clip. Attach the right-angled exhaust bend to the
exhaust pipe with the pipe holder (If the extension pipe
is used, also attach the pipe holder to the connection of
the right-angled exhaust pipe bend and extension
pipe). Attach the right-angled exhaust bend to the
outlet by sliding the pipe lock into the outlet clip (See
Fig. 12).
Fig. 12
Pipe lock
5. Move the heater into position. Attach the right-angled
exhaust pipe bend to the outlet of the exhaust pipe and
attach the right-angled exhaust pipe bend to the inlet.
Make sure all connections are tight (See Fig. 11).
Fig. 11
Outlet
Inlet
Right-angled exhaust bend
Right-angled air hose