Chapter 1, INSTALLATION
36
5. Move the heater into position. Attach the right-angled exhaust pipe bend to the outlet of the exhaust
pipe and attach the right-angled exhaust pipe bend to the inlet. Make sure all connections are tight (See Fig.
11).
.
Fig. 11
6. Fasten the right-angled air hose to the inlet with the
hose clip. Attach the right-angled exhaust bend to the
exhaust pipe with the pipe holder (If the extension pipe
is used, also attach the pipe holder to the connection of
the right-angled exhaust pipe bend and extension
pipe). Attach the right-angled exhaust bend to the
outlet by sliding the pipe lock into the outlet clip (See
Fig. 12).
Fig. 12
