V
ersion 2.0, 07/07
5
***When both temperature and relative humidity readings
exceed alarm level
synchronously, LED status indication
alternate every cycle.
For example: If there is only
one alarm, the REC LED blinks for one cycle and
alarm LED will blink for next cycle. If there are two
alarms, REC LED will not blink. First alarm will
blink for first cycle and the next alarm will blink for
next cycle.
****When the battery is low, all operations will be disabled
automatically. NOTE: Logging automatically stops when
the battery weakens (logged data will be retained). The
supplied software is required to restart logging and to
download logged data.
*****
To use the delay function. Run the datalogger
Graph software, click on the computer icon on the
menu bar (2nd from left) or select LOGGER SET
from the LINK pull-down menu. The Setup window
will appear, and you will see there are two options:
Manual and Instant. If you select the Manual
option, after you click the Setup button, the logger
won't start logging immediately until you press the
yellow button in logger's housing.
