Page
25
Boot Up NumLock Status
It determine the Num-Lock is turned on/off Num Lock. when the system is powered on so that the end user can
use the arrow keys on both the numeric keypad and the keyboard. The default value is "On".
Memory Parity Check
It enables the memory parity checking. The setting are “enable” or “disable”.
Typematic Rate Setting
Typematic Rate sets the rate at which characters on the screen at which characters on the screen repeat. The
default setting is Disabled.
Typematic Rate (Chars/Sec)
Typematic rate sets the rate at which characters on the screen repeat when a key is pressed and held down. You
can select 6-30 characters per second. The default setting is "6".
Typematic Delay (M sec)
When holding down a key, the time between the first and second character display. you specified numbers of
times of character repeat on the screen. The default setting is "250".
Security Option
This category allows you to limit access to the system and Setup or just to Setup. When you select system, the
system will not boot and access to Setup will be denied if the correct password is not entered at the prompt. If
you select Setup, the system will boot but access to Setup will be denied if the correct password is not entered
at the prompt. The default setting is "Setup".
PCI/VGA Palette Snoop
This option controls the system to access the PCI VGA card palette register. In general, this option is
"Disabled". However, you may need to enable this option for some VGA cards which have incorrect color
displayed on some software application.
OS Select For DRAM > 64MB
Some the OS/2 application access the memory in different mode. Enable this option to allow the system use
another mode to access the main memory for OS/2 applications.
Report No Floppy Disk For Windows 95
The system will report floppy disk status to Windows95 if setting is Yes.
VIDEO BIOS Shadow
The system BIOS is automatically shadowed. The default setting for the "Video BIOS Shadow" is "Enabled". It
determines whether video BIOS will be copied to RAM. However, it is optional from chipset design. Video
Shadow will increase the video speed.
C8000 - CFFFF Shadow/E8000 - EFFFF Shadow
These categories determine whether optional ROM will be copied to RAM by 16K byte. You can enable the
optional shadow or you can disable it. The default setting is disabled.
