Page
35
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel
(printer) port.
The choice: 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.
port EPP or ECP mode.
Choices are SPP, ECP/EPP, ECP, EPP/SPP.
ECP Mode Use DMA
Select a DMA channel for the port.
Choices are 3, 1.
Parallel Port EPP Type
Select EPP port type 1.7 or 1.9.
SAVE AND EXIT SETUP
Select this option when you finished setup the CMOS and it will save the change you made and reboot the
system after you press “YES”.
EXIT WITHOUT SAVING
If you decided not to save any change you had made, you can select this option to exit the CMOS setup and all
the change you made will be ignored.
Driver Installation Guide
Insert the driver CD into CD-ROM drive in windows for Autorun.
Follow the CD’s instructions to install drivers for mainboard.