Page 40
4K UHD Hi-end Media player
Page 40
4K UHD Hi-end Media player
❶ RCA, XLR output
Connect NEO S with active speaker or HiFi poweramp by using a pair of RCA or XLR balanced
analog audio cables.
Note：
* NEO S is equipped with two independent stereo output ports: RCA and XLR balanced
ports can output audio signals simultaneously. Generally only choosing one of these ports
is enough, and it is recommended to choose XLR balanced port to obtain better noise
suppression and signal integrity.
* NEO S balanced output is a three-pin XLR male port, which will output diff erential signals
pair (positive/negative signals). The amplifi er circuit can cancel common mode noise and
improve the integrity of the original signal by comparing the voltage diff erence of signals
pair.
* In some audio systems, the positive and negative polarities are reversed. The default
positive polarity are shown below. If you need to reverse the polarity, please set it in the
system:
Settings > DAC audio > XLR Port Polarity > Reverse
RCA-type audio cable
XLR balanced audio cable
Stereo HiFi audio system
(HiFi headphone amplifi er
/Active monitor speaker)
Positive polarity d system positive setting
Negative polarity d system negative setting
+
+
-
-
GND
GND
