6
Installation
•
Do not obstruct any ventilation ports on the body of the hood of the barbeque.
•
The gas cylinder must be kept out of direct sunlight and away from any heat
sources.
•
During a gas cylinder swap or refill ensure that all control knobs are in the
OFF
position and there are no naked flames in close proximity.
•
Gas hoses must NOT be twisted, kinked or under any form of tension. The gas
hoses should hang freely with no bends, folds or kinks.
•
No part of the flexible hose should come into contact with any part of the
barbeque that will become hot during operation.
•
A regular inspection of the hose should be made to ensure that it is not cracking,
breaking cutting or deteriorating in any other way.
•
Any damage to the hose requires an immediate replacement from your local
agent or gas expert.
Assembling your Barbeque
Start by unpacking the barbeque, and placing it on a flat surface. Be careful not to damage
the painted finish.
Check that you have all the correct parts.
Remove all packaging materials and dispose of thoughtfully.