1
General notes
Compliance with the following instructions is mandatory to ensure the functionality and safety of the
product. If the following instructions given especially but not limited for general safety, transport,
storage, mounting, operating conditions, start-up, maintenance, repair, cleaning and disposal / recy-
cling are not observed, the product may not operate safely and may cause a hazard to the life and
limb of users and third parties.
Deviations from the following requirements may therefore lead both to the loss of the statutory material
defect liability rights and to the liability of the buyer for the product that has become unsafe due to the
deviation from the speci
fi
cations.
1.1
Validity
This document is valid for ECblue axial fans with the motor sizes
D
(116) and
G
(152), which are
designed for use in the agricultural industry.
The used motor size is recognisable from the type designation (see rating plate).
Example for fans with motor size
“
D
”
: F F _ _ _-Z I _.
D
_._ _ _ _
A total of 2 connection versions are available (see rating plate)
1. ECblue MB ECblue BASIC-MODBUS
2. ECblue BASIC
Information
In the case of fans with the quality mark (see rating plate), please note the related speci
fi
cations
depending on the application location!
1.2
Structure of the assembly instructions
Before installation and start-up, read this assembly instructions carefully to ensure correct use!
We emphasize that these assembly instructions apply to speci
fi
c units only, and are in no way valid for
the complete system!
Use these assembly instructions to work safely with and on the device. They contain safety instruc-
tions that must be complied with as well as information that is required for failure-free operation of the
device.
Keep these assembly instructions together with the device. It must be ensured that all persons that
are to work on the device can refer to the assembly instructions at any time.
Keep the assembly instructions for continued use. They must be passed-on to all successive owners,
users and
fi
nal customers.
1.3
Target group
The assembly instructions address persons entrusted with planning, installation, commissioning and
maintenance and servicing and who have the corresponding quali
fi
cations and skills for their job.
1.4
Exclusion of liability
Concurrence between the contents of these assembly instructions and the described hardware and
software in the device has been examined. It is still possible that non-compliances exist; no guarantee
is assumed for complete conformity. To allow for future developments, construction methods and
technical data given are subject to alteration. We do not accept any liability for possible errors or
omissions in the information contained in data, illustrations or drawings provided.
ZIEHL-ABEGG SE is not liable for damage due to misuse, improper use or as a consequence of
unauthorized repairs or modi
fi
cations.
1.5
Copyright
These assembly instructions contain copyright protected information. The assembly instructions may
be neither completely nor partially photocopied, reproduced, translated or put on data medium without
previous explicit consent from ZIEHL-ABEGG SE. Infringements are liable for damages. All rights
reserved, including those that arise through patent issue or registration on a utility model.
Assembly instructions
ECblue BASIC-MODBUS, ECblue BASIC
General notes
L-BAL-F079D-GB 2044 Index 002
Part.-No.
5/80
