EC Declaration of Incorporation
as de
fi
ned by the EC Machinery Directive 2006/42/EC, Annex II B
The design of the incomplete machine:
•
External rotor motor for explosion-hazardous areas, type of protection "nA" or "e" MK..
•
Axial fan for explosion-hazardous areas, type of protection "c", with external rotor motor for explosion-hazardous
areas, type of protection "nA" or "e" FB..
•
Centrifugal fan for explosion-hazardous areas, type of protection "c", with external rotor motor for explosion-
hazardous areas, type of protection "nA" or "e" RE.., RH..
•
Centrifugal fan for explosion-hazardous areas, type of protection "c", with EC-internal rotor motor for explosion-
hazardous areas, type of protection "tc" RH.., GR..
•
Centrifugal fan for explosion-hazardous areas, type of protection "c", with internal rotor motor for explosion-
hazardous areas, type of protection "d" ER..
•
Centrifugal fan for explosion-hazardous areas, type of protection "c", with internal rotor motor for explosion-
hazardous areas, type of protection "nA" GR.., RG..
•
Centrifugal fan for explosion-hazardous areas, type of protection "c", with internal rotor motor for explosion-
hazardous areas, type of protection "tc" GR.., RG..
Motor type:
•
Asynchronous external or internal rotor motor
•
Electronically commutated internal rotor motor (with integrated EC controller)
complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1, 1.5.7 in EC Machinery
Directive 2006/42/EC.
The manufacturer is the
ZIEHL-ABEGG SE
Heinz-Ziehl-Strasse
D-74653 Kuenzelsau
The following standards are applied:
EN 1127-1:2011
EN 60204-1:2006
Explosive atmospheres - Explosion protection - Part 1: Fundamentals and methodology
Safety of machinery; electrical equipment of machines; Part 1: General requirements
EN ISO 12100:2010
Safety of machinery; basic concepts, general principles for design
EN ISO 13857:2008
Safety of machinery; safety distances to prevent danger zones being reached by the
upper limbs
Note:
The maintenance of the EN ISO 13857:2008 relates only to the installed accidental
contact protection, provided that it is part of the scope of delivery.
The speci
fi
c technical documentation in accordance with Appendix VII B has been written and is available in its
entirety.
The person authorised for compiling the speci
fi
c technical documentation is: Dr. W. Angelis, address see above.
The speci
fi
c documentation will be transmitted to the of
fi
cial authorities on justi
fi
ed request. The transmission can
be electronic, on data carriers or on paper. All industrial property rights remain with the above-mentioned
manufacturer.
It is prohibited to commission this incomplete machine until it has been secured that the machine into
which it was incorporated complies with the stipulations of the EC Machinery Directive.
K
ü
nzelsau, 28.02.2014
Dr. W. Angelis - Technical Director Ventilation Division
1
english
ZA87ex-GB-03/14
Index
005
00296718-GB
