9.9.3
Save user settings restore with PIN 9090
Controller Setup
The individually made device con
fi
gurations (User Setting) can be saved here (corre-
sponds to PIN 9091).
By entering
PIN 9090
the individually made device con
fi
gurations can be reestablished
(
Start - PIN Input).
A
fi
le (userconf.csv) is generated and saved on the main drive (root directory) when
saving the user setting.
The data can be accessed via the
ZAset
program.
OFF
Save User Setup
Information
By entering the
“
PIN 9095
”
in the
“
PIN
”
menu of the
“
Start
”
menu group the device is reset to the as-
delivered state (except for the saved events in the
“
Protocol
”
menu).
Any changes that have been made to the settings are thus lost.
9.9.4
Sensor Alarm ON / OFF
The inputs
“
E1 Analogue In
”
and if Sensor 2 is activated
“
E2 Analogue In
”
are monitored.
In case of an interruption or short-circuit in the sensor conductor, or in case of measured values that
lie outside of the device
’
s measurement range, a time-delayed fault indication takes place.
Function only in controller mode (from
2.01
)!
Controller Setup
With
“
Alarm Sensors
”
=
“
ON
”
(factory setting). Indicated
sensor disturbances are displayed as
“
Alarm
”
alternating to
the actual value and stored in the menu of
“
Protocol
”
.
A programmed alarm relay (factory setting relay K2) indicates
the sensor failure.
Sensor 1
ON
Alarm sensors
Controller Setup
With
“
AlarmSensors
”
=
“
OFF
”
areindicated sensor disturban-
ces as
“
Message
”
alternating to the actual value and stored in
the menu of
“
Protocol
”
.
Sensor 1
OFF
Alarm sensors
Operating Instructions
Fcontrol
–
model series FXDM25/32AM
Programming
L-BAL-E212-GB 1451 Index 003
Part.-No.
57/123
