3.3.2
Lifting
Figure 3-3-2-01 - Position of attachment points
Note the following when lifting the elevator machine:
"
"
Lift only at the existing attachment points (see Figure 3-3-2-01).
"
"
Lift at all existing attachment points at the same time.
"
"
Lift the elevator machine using suitable lifting gear.
"
"
Lift the elevator machine correctly taking into account the centre of gravity.
"
"
Lift the elevator machine without additional loads.
3.4
Storage
"
"
Store the elevator machine in the original packaging in a dry area protected from the weather or
protect it from dirt and weather until
fi
nal mounting.
"
"
Leave the VCI paper on the grooved surface of the traction sheave as corrosion protection until the
elevator machine is installed.
"
"
Extreme heat or cold (storage temperature -20
°
C to +60
°
C) must be avoided!
"
"
High humidity which can lead to condensation must be avoided.
"
"
Avoid aggressive conditions (for example salt spray)!
"
"
Maximum storage duration: 12 months
- Release brake
- Turn motor shaft manually
- Listen for unusual bearing noises
If the maximum storage duration is exceeded, the following procedure must be carried out after 12
months at 2-3 month intervals to prevent damage to the bearings:
- Release brake
- Turn motor shaft manually at least 3 turns in both directions to ensure even distribution of the
bearing grease
If you encounter any irregularities, please contact ZIEHL-ABEGG SE customer service.
3.5
Disposal / Recycling
Disposal must be carried out professionally and environmentally friendly in accordance with the legal
stipulations.
Translation of the original operating instructions
ZAtop SM250.45B
Product overview
A-TBA17_04-GB 2023/28 Index 004 Part.-No. 01013409-GB (EU-BD 760/1)
10/84
