U-EK230E
L-BAL-E185-GB 2023/10 Index 005
11660-0711-03
10/12
17
Maintenance and repair
•
The devices are maintenance free. Only the manufacturer may perform repairs. We recommend
testing within the regular maintenance intervals of the plant, where the device is used. EN 60079-17
is to be observed.
•
The guarantee presupposes the observance of these operating instructions (safety and start-up
instructions).
18
Disposal / Recycling
Disposal must be carried out professionally and in an environmentally friendly way in accordance with
the respective national legal stipulations.
•
Separate the materials by type and in an environmentally-friendly way.
•
If necessary, commission a specialist company with the waste disposal.
WEEE marking
Disposal of waste electrical and electronic equipment (applicable in the
European Union).
Equipment affected by this is indicated by the corresponding symbol.
You can find further information on this on our website.
19
Manufacturer reference
Our products are manufactured in accordance with the relevant international regulations. If you have any
questions concerning the use of our products or plan special uses, please contact:
ZIEHL-ABEGG SE
ZIEHL-ABEGG UK Ltd.
Heinz-Ziehl-Straße
Springfield Business Park
74653 Künzelsau
Chelmsford, Essex, CM2 5AS
Deutschland
United Kingdom
Telefon: +49 (0) 7940 16-0
Fon + 44 1245 449010
20
Service information
If you have any technical questions while commissioning or regarding malfunctions, please contact our
support department for control systems - ventilation technology.
phone: +49 (0) 7940 16-800
Email:
fan-controls-service@ziehl-abegg.de
Our worldwide contacts are available in our subsidiaries for deliveries outside of Germany
see
