Assembly instructions
ZAtop SM132 - Retro
fi
tting of forced venti-
lation
1
General information
Forced ventilation installed
1.1
Structure of the assembly instructions
"
The assembly instructions do not replace the original operating instructions for the motor or frequency
inverter. Also observe the original operating instructions.
"
The original operating instructions has to be always available!
2
Safety instructions
2.1
General information
•
ZIEHL-ABEGG SE Spare parts are not ready-to-use products and may only be operated when they have
been installed on an elevator machine and their safety has been assured using guard grilles, barriers,
structural attachments or other appropriate measures, depending on the application (see also
DIN EN ISO 13857)!
•
Only have installation and electrical connection carried out by trained specialist personnel.
•
It is strictly forbidden for work to be carried out on any components while they are connected to live voltage.
The open equipment is protected to IP00. It is possible to come into direct contact with dangerous voltages!
•
Check to ensure voltage is not applied to input terminals prior to commencing work with controller.
•
The terminal box for the forced ventilation must be closed during operation.
Danger!
Warning of hand injuries!
"
Risk of injury from reaching into the rope guard.
"
Do not carry out any activities during operation.
"
Only perform maintenance work on the drive when stopped!
A-TIA20_03-D-GB 2006 Index 001
Part.-No. 01015845-D-GB
english
