Figure 7-05
9. Dismounting absolute encoder (10), see "Replacement of the absolute encoder A-TIA17_02-..."
Figure 7-06
Figure 7-07
10.
Caution!
Due to the great weight of the brake body, we recommend you to secure and change the
brake body by using an eye bolt M10 (A ) and appropriate lifting gear.
11. Fit the mounting sleeve (11). Tighten the socket cap screw M20 (12) with an allen wrench size 17
hand tight in the thread at the shaft end.
12. Gradually unscrew the hexagon head bolts (13) alternately in a diagonal con
fi
guration with a
screw wrench.
RTW 250 - ZAtop SM180.24/B and SM180.35/B:
Unscrew the hexagon head bolts M8 x 130 - 10.9 (13) with a screw wrench size 13
RTW 350 - ZAtop SM180.45/B:
Unscrew the hexagon head bolts M10 x 130 - 8.8 (13) with a screw wrench size 16
RTW 450 - ZAtop SM180.46/B:
Unscrew the hexagon head bolts M12 x 130 - 8.8 (13) with a screw wrench size 18
Figure 7-08
Figure 7-09
13. Turn the brake body (14) 90
°
so that it can be secured with a lifting gear to the lifting eye bolt (A).
Assembly instructions
–
model series ZAtop
Dismounting the brake
A-TIA19_13-GB 2027 Index 002
Part.-No. 01013468-GB
9/16
