TR1200IP
12390-0706-05
Page
20 / 23
www.ziehl.de
15
TR1200IP Ethernet interface
Ethernet
UDP
(Port
0…65535)
ZIEHL RTD
(can be switched off
)
Read measurements and device data
TCP
MODBUS TCP
(Port 502, disconnectable, 1
connection)
Read measurements and device data
http (interface)
(Port 80
disconnectable
)
Read access
Read measurements
and device data
Configuration
access
+ configure sensors and
relays
Full access
+ network settings and
firmware update
All protocols can be activated or deactivated independent of each other.
15.1 ZIEHL RTD UDP protocol
The ZIEHL RTD protocol can be switched off in the menu item
8
udp.
8
-
8
rtd
8
.
The UDP Port can be set in the menu item
8
udp.
8
-
8
ud1
8
and
8
ud2
8
in the range of 0…65535
in 2 blocks.
You can find documentation on the ZIEHL RTD protocol in the Internet at
TR1200IP
– ZIEHL RTD protocol
15.2 Modbus TCP protocol
The modbus protocol can be switched off in the menu item
8
tcp.
8
-
8
mod
8
.
The modbus TCP Port is permanently set to 502 and cannot be changed.
You can find documentation on the Modbus TCP protocol in the Internet at
TR1200IP
– Modbus TCP protocol.
15.3 http protocol
The browser and firmware update function depend on the access set in the menu item
8
tcp.
8
-
8
http
8
.
The following functions are available in the browser:
Full access
8
ful
8
Measurements and device data can be viewed
The TR1200IP can be configured
Network settings can be modified
Firmware update is possible
Configuration access
8
par
8
Measurements and device data can be viewed, configuration
possible, network settings cannot be modified
Read access
8
rea
8
Measurements and device data can be viewed
No access
8
off
8
The http port is completely switched off
The http port is permanently set to 80 and cannot be changed.
