13
Installation
Get
St
art
ed
Video
1. Use an HDMI cable to connect an UltraHD sources to the Input on the back
panel of the unit. The Zigen locking HDMI cable is recommended for a sturdy
connection.
2. Use an HDMI cable to connect up to right displays to the Outputs on the back panel of the unit.
The Zigen locking HDMI cable is recommended for a sturdy connection.
The HDMI cable can then be connected in any of the following ways:
• Connect the HDMI cable to an Ultra HD display.
• Connect the HDMI cable to another Zigen switch or splitter, for cascading purposes.
Power
3. Connect the included 24V-DC power supply to the 24V-DC power receptacle on the rear panel
of the switch.
4. Connect the power supply to an electrical outlet.