4 ZIG-SW42 USER MANUAL
Introduction
New 600 MHz HDMI switch designed for switching in home and commercial
environments where switching of high-bandwidth UHD (2160P60 4:4:4) content
is required
– or just to be safe for future sources including the “new blu” coming
this fall. The SW42 features 4 HDMI 2.0 Inputs and 1 HDMI 2.0 output, digital
audio de-embedding of active channel and an Ethernet port and WebOS for
setup, switching, EDID management, firmware updates and remote reset.
Additionally, the SW42 is controllable via built in IR receiver or RS-232. The
SW42 also has a mirrored HDBaseT 100 meter port (single CAT5e of higher).
SW42 also routes Ethernet and is compliant with the entire Zigen ecosystem of
products by routing network commands and control in receiver nodes.
Typical Applications:
Classrooms, Boardrooms, Conference rooms for switching UHD content
sources via multiple control options (3
rd
party controllers, WebOS, simple
remote or front panel buttons)
High-end home theaters for showing UHD 2.0 content with HDCP 2.2
copy protection
Long distance applications where the rack is up to 100 meters from the
display.
Package Contents
1 x ZIG-SW42
1 x 12V/2.5A DC Power Supply
IEC USA AC Cord 3’
Remote Control
1 x User Manual
Features
HDMI 2.0 (600 MHz UHD) on all ports.
18 GBP/sec video bandwidth
WebOS Interface
Supports digital video formats up to 4K UHD (2160P60 @4:4:4 pixel
format)
Advanced EDID management.
