Handleiding Internet van Ziggo
18
3.3.3
Telephone or Fax Connection
When properly connected, most telephony devices can be used with the
Wireless Voice Gateway just as with a conventional telephone service. To make
a normal telephone call, pick up the handset; listen for a dial tone, then dial the
desired number. For services such as call waiting, use the hook switch (or FLASH
button) to change calls. The following procedures describe some of the
possible connection schemes for using telephony devices with the Wireless
Voice Gateway.
1.
1. Connect a standard phone line cord directly from the phone (fax
machine, answering machine, caller ID box, etc.) to one of the LINE jacks on
the Wireless Voice Gateway.
2.
If there is a phone line in your home which is NOT connected to another
telephone service provider, connect a standard phone line cord from a jack
on this line to one of the LINE jacks of the Wireless Voice Gateway. Connect
a standard phone line cord directly from the phone (fax machine, answering
machine, caller ID box, etc.) to one of the other jacks in the house that uses
that line.
3.
If you have a multi-line telephone, connect a standard phone line cord (not
an RJ-14 type line cord) from the phone to the LINE jacks on the Wireless
Voice Gateway. (Other phones can be added to each line by using standard
phone line splitters.)
Summary of Contents for Technicolor TC7210
