Handleiding Internet van Ziggo
57
802.11 n-mode
It may help you to Enable or Disable the 11N mode.
To enable you need to select Auto, to disable you
need to select Off, and so force the AP to operate
in 802.11 n-mode.
Bandwidth
Select wireless channel width 20 MHz is for default
value (bandwidth taken by wireless signals of this
access point.)
Sideband for Control
Channel (40 MHz only)
There is “Lower” and “Upper” can be selected if
Bandwidth 40 MHz was Enabled.
Control Channel
In 802.11 Band 2.4GHz, there are 1 to 13 channels.
In 802.11 Band 5GHz, there are 36, 40, 44, 48 total
4 channels for all country. Choose the one that is
suitable for this device.
Current Channel
The channel that you choose will be displayed in
this field.
Regulatory Mode
suppose 802.11d and 802.11h to satisfy specific
environment and request.
TPC Mitigation (db)
Fixed Maximum TX Power Level, options 0 ~ 4 db
OBSS Coexistence
Overlapping BBS coexistence, here to control this
function Enable or Disable, default was enabled.
STBC Tx
Space–time block coding is a technique used in
wireless communications to transmit multiple
copies of a data stream across a number of
antennas and to exploit the various received
versions of the data to improve the reliability of
data-transfer. Default was “Auto”.
Restore Wireless defaulfs
To recover to the default settings, press this button
to retrieve the settings then click Apply.
Summary of Contents for Technicolor TC7210
