Handleiding Internet van Ziggo
69
Basis Rate Set
The rates that for all clients want to associate with.
Choose “Default” and “All” for the
802.11a/b/g/n/ac.
Multicast Rate
The baseline levels that wireless device able to
deliver in order to connect to the wireless voice
gateway. Lower multicast rates mean weaker,
farther signals are allowed to connection. Higher
multicast rates mean that only close, strong signals
are allowed.
NPHY Rate
Set the Physical Layer rate. The rate always set
“Use Legacy Rate”.
Rate
It decides the speed of data transmission. There
are serveral rates provided here for you to choose.
Choose any one of it according to your needs by
using the drop-down menu.
Beacon Interval
Set the period of beacon transmissions to allow
mobile stations to locate and identify a BSS. The
measure unit it “time units” (TU) of 1024
microseconds. (Value range: 1~65535).
DTIM Interval
The value you set here is used to inform mobile
stations when mutlicast frames that have been
buffered at the Wireless Voice Gateways will be
delivered and how often that delivery occurs
(Value range: 1~255).
Fragmentation Threshold
Set the number of the fragmentating frames to
make the data to be delivered without errors
induced by the interference. Frames longer than
the value you set here are fragmented before the
initial transmission into fragments no longer than
the value of the threshold (Value range:
256~2346).
RTS Threshold
Set the value for sending a request to the
destination. All the frames of a length greater than
the threshold that you set here will be sent with the
four-way frame exchange. And, a lenth less than or
equal to the value that you set will not be
proceeded by RTS (Value range: 0~2347).
Summary of Contents for Technicolor TC7210
