ZGR TOWER PRO 6 10 KVA
Operation manual
www.zigor.com
36
8
TECHNICAL SPECIFICATIONS
Model
ZGR TOWER
PRO 6
ZGR TOWER
PRO 6 -LBT
ZGR TOWER
PRO 10
ZGR TOWER
PRO 10 -LBT
Capacity
6 kVA / 6 kW
10 kVA / 10 kW
INPUT ELECTRICAL CHARACTERISTICS
Input
Single-phase with Ground
Nominal voltage
220 / 230 / 240 Vac
Voltage range
165 ~ 276 Vac
Rated frequency
50 Hz / 60 Hz Automatically selected
Frequency range
45 ~ 65 Hz
Power factor
≥
0,99 (input THDV
≤
1%)
Bypass voltage range
220 Vac max
：
d25% (+10%, +15%, 20%, 25%)
230 Vac max
：
d20% (+10% ,+15%, 20% )
240 Vac max
：
d15% (+10%, +15%)
Min
：
default -45% (-20%, -30%, -45%)
Bypass frequency range
±1 %, ±2 %, ±4 %, ±5 %, ±10 %
THDI
≤
3% (100% lineal load, input THDV
≤
1%)
≤
5% (100% non-lineal load, input THDV
≤
1%)
Generator input
Support
OUTPUT ELECTRICAL CHARACTERISTICS
Output type
Single-phase with Ground
Rated voltage
220 /230 / 240 Vac can be set
Voltage regulation
±1,0 %
Power factor
1,0
Crest factor
3:1
Harmonic distortion (THDv)
Less than 2 % at 100 % lineal load
Less than 5 % at 100 % non-lineal load
Waveform
Pure Sinewave
Transfer time
AC Mode - Batt.
mode
0 ms
Inverter - Bypass
0 ms
Efficiency AC mode
≥
93 %
BATTERIES
Battery type
VRLA
No. Battery
16 / 18 / 20 pcs, adjustable
Charge model
Boost charge or float charge auto switch
Charge time
Boost charge up to 20Hr (max.)
Charge current (max.)
10 A
SYSTEM CHARACTERISTICS
Frequency regulation
±0,1 % (stand-alone)
±0,25 % (parallel operation)
Frequency
Utility mode: tracking mains frequency
Battery mode: 50 Hz / 60 Hz settable
Frequency track speed
1 Hz/s (stand-alone)
0,5Hz/s (parallel operation)
Overload capacity
105 % ~ 110 %, 10 minutes
110% ~ 130%, lasts 1 minute
> 130 %, switch to bypass immediately
