ZGR TOWER PRO 6 10 KVA
Operation manual
www.zigor.com
8
1.5
Precautions on receiving the unit
Visually check that the UPS location is adequate by checking its characteristics (clean, free of leaks with good
ventilation); the floor must be level and have sufficient load resistance for the equipment.
Checking the material
•
On receiving the material, a visual inspection should be made in order to detect any anomalies that may
have occurred during transport.
•
List and check all the items indicated on the delivery note. Should any component be missing, notify the
forwarding agent within the established deadline.
•
Extract all parts from the packaging and examine the unit for any damage caused during transport.
•
Report any damage to the forwarding agent and ZlGOR.
•
Check that the material delivered corresponds to the delivery note. Check the manufacturer's label placed
at the rear or on one side of the unit.
•
Responsibility for the loss or damage of Products shall transfer to the Customer from the moment ZIGOR,
places these at his disposal in the place indicated by the Customer.
1.6
Symbol Description
The safety symbols cited in this manual are shown in Table 1-2, which are used to inform readers of safety issues
that should be obeyed when installation, operation and maintenance.
SAFETY SYMBOL
INDICATION
Attention
Static discharge sensitive
Risk of electric shock
Table 1-2 Security symbol meanings
SYMBOL
INDICATION
Turn ON/OFF the UPS
Alternating current source (AC)
Direct current source (DC)
Protective ground
Table 1-3 Symbol meaning
From then on, the customer will have 24 hours to make any claim under guarantee for any anomaly in the
amount or quality of the products received, providing details of the material received in bad condition after
reporting this circumstance on the forwarding agent's delivery note on reception.
Should the customer not report any defect within 24 hours, it will be understood that he has accepted delivery
of the unit.
