19
18
Repair
Repair
II.
Problem
Possible cause
Prevention/solution
My oven is not heating enough.
1. Empty gas cylinder.
2. Cracks or leaks in the hose.
3. Bad connection.
4. Operation in
extreme conditions.
1. Check that the gas cylinder is full.
Even a cylinder containing little gas can
affect operation.
2. Check the hose for cracks or leaks.
3. Check that the gas cylinder and hose
are firmly attached to the gas block.
4. The gas block and the oven must not
be used in extreme conditions (eg in
strong winds).
You cannot light your Piana Gas oven.
1. Error in the boot process.
2. Empty gas cylinder.
3. Cracks or leaks in the hose.
4. Bad connection.
5. Too fast rotation of gas block knob.
1. Go through the necessary steps of
pressing, holding, turning the gas valve
knob towards the « start position » for
a few seconds. This may take several
attempts depending on time elapsed
since last ignition, ambient tempera-
tures.
Caution, do not look directly at the
oven during the ignition process.
2. After many attempts, if the oven
does not turn on still not, check that
the gas cylinder is full.
Even a cylinder containing little gas can
affect operation.
3. Check the hose for cracks or leaks.
4. Check that the gas cylinder and hose
are firmly attached to the gas block.
5. Turning the gas block knob too
quickly may prevent ignition.
The flame is too orange or blue.
Variations in the environment, the food
being cooked, the ambient tempe-
rature and the state of the Piana Gaz
oven may have a
affect the color of the flame.
The color of the flame has no conse-
quence or impact on the quality or
flavor of the food.
The flame does not sustain.
1. Lack of oxygen
2. Oven positioned on uneven surface.
1. If the position of the Piana Gas oven
is inclined, the air will not circulate
properly.
2. Try to put it on a flat surface.
EN
Technical informations
Technical informations
III.
PRODUCTION
NAME
PIANA GAS
PIZZA OVEN
Pin 2575xxxxxxx
MODEL NUMBER
ZiiPa22-043
ZiiPa22-044
ZiiPa22-045
ZiiPa22-046
CATEGORY
I3+(28*30/37)
☐
I3B/P(30)
☐
I3B/P(37)
☐
I3B/P(50)
☐
COUNTRY CODE
BE, CH, CY, CZ, ES,
FR, GB, GR, IE, IT, LT,
LU, LV, PT,
SI, SK
AL, BG, CY, DK,
EE, FI, FR, HU, HR, IS
,IT, LT, LU, MT, MK,
NL, NO, RO, SK, SI,
SE, TR
PL
AT, DE, SK, CH
GAS TYPE AND
PRESSURE
G30 Butane at
28-30mbar and
G31 Propane at
37mbar
G30 Butane and
G31 Propane at
30mbar
G30 Butane and
G31 Propane at
37mbar
G30 Butane and
G31 Propane at
50mbar
INJECTOR SIZE
0.6 mm
0.6 mm
0.57 mm
0.53 mm
HEAT INPUT
Qn= 2.8 kW( 203 g/h)
SERIAL NUMBER
MANUFACTURER
NINGBO YINGCHUANG INTELLIGENT TECHNOLOGY CO., LTD
Tongguang Village, Fengshan Street,Yuyao 315400, Zhejiang, China
USE OUTDOORS ONLY
READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING, ACCESSIBLE PARTS MAY BE VERY HOT. KEEPING YOUNG CHILDREN AWAY.
!
EN
EN
