USB Smart Cable
User Manual
UM018112-0908
USB Smart Cable
5
4. Select
Specify a location
; then click
Next.
5. Browse to one of the following driver directory:
<ZDS II Installation Directory>
\device drivers\USB\x32
<ZDS II Installation CD>\Device Drivers\USB\x32
6. Click
OK
, and then click
Next
after the appropriate driver is found.
7. Click
Finish
to complete the installation.
Windows 98 SE
1. Connect the USB Smart Cable to the host PC. The Found New Hard-
ware Wizard should activate automatically.
2. In the Found New Hardware Wizard, click
Next
.
3. Select
Search for the best driver for your device (Recommended)
.
Click
Next.
4. Select
Specify a location
. Browse one of the following to the driver
directory:
<ZDS II Installation Directory>
\device drivers\USB\x32
<ZDS II Installation CD>\Device Drivers\USB\x32
5. Click
Next
, and then click
Next
again after the appropriate driver is
found.
6. Click
Finish
to complete the installation.
